viii
Training information
(for FCC approved equipment)
The TT-6300 MF/HF DSC is designed for occupational use only and is also
classified as such. It must be operated by licensed personnel only. It must only
be used in the course of employment by individuals aware of both the hazards
as well as the way to minimize those hazards.
The radio is thus NOT intended for use in an uncontrolled environment by
general public. The SAILOR 6300 MF/HF DSC has been tested and complies
with the FCC RF exposure limits for Occupational Use Only. The radio also
complies with the following guidelines and standards regarding RF energy and
electromagnetic energy levels including the recommended levels for human
exposure:
• FCC OET Bulletin 65 Supplement C, evaluating compliance with FCC
guidelines for human exposure to radio frequency electromagnetic fields.
• American National Standards Institute (C95.1) IEEE standard for safety
levels with respect to human exposure to radio frequency electromagnetic
fields, 3 kHz to 300 GHz
• American National Standards Institute (C95.3) IEEE recommended
practice for the measurement of potentially hazardous electromagnetic
fields - RF and microwaves.
Below the RF exposure hazards and instructions in safe operation of the radio
within the FCC RF exposure limits established for it are described.
Warning
The radio set generates electromagnetic RF (radio frequency) energy when
transmitting. To ensure that no personnel will be exposed to excessive
amounts of RF-energy and to avoid health hazards from excessive exposure
to RF energy, the following safety distances must be followed:
Antenna Safety distance
150W Calculated: 1.71 m or 5.7 feet
250W Calculated: 2.21 m or 7.3 feet
500W Calculated: 3.12 m or 10.3 feet
To Next Page
Loading...
