Chapter 2: Operation
42 Setup
Setup
The following setup pages are described in this section of the manual:
• Radio setup
• Channel setup
• Power Supply
• DSC setup
• DSC call logs
• System setup
• Controller setup
• Diagnostics
• System config
Accessing a setup page
To change a setting in one of the SETUP pages, do as follows
1. Push the soft key SETUP. If it is not in the display, push the soft key
MORE until SETUP appears.
2. Push the arrow soft key or to advance to the SETUP page you
want to edit.
3. Turn the selector knob to go to a setting, then push the selector knob to
change the setting.
4. Push EXIT to return to normal radio operation.
To Next Page
Loading...
