Chapter 2: Operation
Replay function 41
2222
Replay function
With replay you can playback received voice messages in the loudspeaker.
Recording is activated automatically when a signal is received. Recording is
not possible during playback. Up to 60 tracks or 240 seconds can be
handled.
The recorded channel is displayed and the message length is shown in
seconds. The display shows also how old the message is. If the 240 seconds
storage limit is reached, the oldest data is overwritten.
Replaying recorded messages
Push the replay button to replay a recorded message. The latest message is
repeated. Information about this message is shown in the display. If a signal
is received while in replay mode the display shows in the display.
To stop replaying the message push the soft key STOP. To skip through all
recorded messages push the replay button repeatedly at short intervals.
To record messages only (without the continuous background
noise) activate the squelch function. Push the soft key SQLCH.
The replay function can be started even in a Distress situation. If a
DSC call is received the replay function continues the playback.
To Next Page
Loading...
