98-137261-F 5
Chapter 2
Operation 2
This chapter has the following sections:
• Operation – SAILOR 6004 Control Panel
• Operation with INS equipment
Operation – SAILOR 6004 Control Panel
As soon as DC power is provided the SAILOR 6390 Navtex Receiver is on.
To switch on the SAILOR 6004 Control Panel push the power
button. Operate the SAILOR 6004 Control Panel by tapping the
touch screen. To switch off the SAILOR 6004 Control Panel push
and hold the power button for 2 seconds and follow the instructions
on the screen.
Tap the Navtex icon.
The icon System holds the application manager and settings for the SAILOR
6004 Control panel.
When the remote switch in the SAILOR 6004 Control Panel is
wired and it is switched on, you can only use the Power button to
reboot the SAILOR 6004 Control Panel, you cannot switch it off.
Figure 4: Navtex icon in SAILOR 6004 Control Panel
To Next Page
Loading...
Need help?
General
