Control Panel verification
98-137261-F Chapter 3: Service & maintenance 35
If the connection between the SAILOR 6390 Navtex Receiver and the SAILOR
6004 Control Panel is lost, the SAILOR 6004 Control Panel shows an error
“Connection lost”. Check the LAN cable and make sure that no one is connected
to the SAILOR 6390 Navtex Receiver using the Service Interface.
Responsibility transfer
When receiving a request to transfer the responsibility using ACN sentence, the
SAILOR 6390 Navtex Receiver will evaluate that request.
If the request is denied, the SAILOR 6390 Navtex Receiver will report the refusal
using ARC sentence to the external BAM-compliant equipment that requested
transfer of responsibility.
If the request is granted, the SAILOR 6390 Navtex Receiver will transfer
responsibility to the external BAM-compliant equipment, change the alert state
accordingly and present the changed alert state.
If the external BAM-compliant equipment is no longer detected, Navtex will
resume responsibility for the alerts for which responsibility was transferred.
Control Panel verification
System app
Having switched on the SAILOR 6004 Control Panel, an icon named System is
always displayed, plus the icon(s) of the applications that are installed. Under
System you can set up and manage the SAILOR 6004 Control Panel.
Figure 33: Screen to enter System (example)
To Next Page
Loading...
Need help?
General
