Operation – SAILOR 6004 Control Panel
14 Chapter 2: Operation 98-137261-F
3. Tap Message types.
4. Tap the frequency you want to set up a filter for, e.g. 490 kHz Message
types.
5. Swipe and select the message types you want to receive on this frequency. A,
B, D and L are mandatory.
6. Tap Apply. The selected message types are displayed directly below the
frequency.
To copy filter settings
You can copy the filter settings from one output mode to another, e.g. from
Display to INS and Printer
To copy filter settings do as follows:
1. While in the Filter mode tap the menu icon.
2. Tap Copy to...
3. Tap the filter you want to copy to, e.g. from Printer to Display or INS.
Figure 12: Filters for message types
You cannot copy if the destination filter is set to Automatic
Mode.
To Next Page
Loading...
Need help?
General
