11
AUTO-LEARNING PROCEDURE FOR NEW ELECTRONIC
KEYS
Follow this procedure to replace the electronic keys:
With the immobiliser disarmed, proceed as follow:
- Turn the starter key on and then off for 3 times then turn on the
starter key again.
All the operation must be carry out within 7 s.
- LED comes on in a fixed way signalling that the immobiliser is
ready to store the electronic keys.
- Put a key which was already stored in connection with the control
panel, then the other keys to be stored.
- As soon as the key code is stored the LED goes off for 1 s.
The autolearning procedure can be interrupted at any time by simply
turning the ignition key ON. It will automatically interrupt itself when 4
keys are stored (max number of keys).
WARNING:
- The operations of auto-learning of the new electronic keys must be
realized only with the immobiliser disarmed.
- In case of loss of all the keys is not possible to execute the auto-
learning procedure.
- You can store up to 4 keys max.
BESCHRIJVING VAN HET PRODUCT
Immobiliser aangestuurd door een antiscanner elektronische sleutel,
met automatische inschakeling, dubbele elektrische motorblokkering,
“Fail Safe” en automatische programmering van de elektronische
sleutels.
NL
06DE1675B.p65 17/01/03, 16.4211
To Next Page
Loading...
Need help?
General