Quick Guide
6. You can now select one of our pre-loaded les below by navigating to, and selecting the le
name:
File Name:
Unicorn M3 Thumbscrew Vase CocoonBot
Size (LxWxH):
47x19x51mm 19x19x4mm 50x50x100mm 26x34x15mm
Inll:
100% 100% 0% 20%
Resolution:
0.2mm 0.1mm 0.2mm 0.1mm
Print Time:
50min 6min 1hr 43min 36min
7. Your printer will now commence heating the Extruder and Heated Print Bed to the correct
printing range, before returning to the home position and commencing the print
8. Once your printer has completed printing the le, the nozzle and Heated Print Bed will
commence cooling down. Once cooled, turn o your 3D printer and carefully remove the 3D
printed object using the supplied Scraper and gently lifting the object with your hand
Always take care when using the Scraper. Never use excessive force or scrape towards your
hand.
NOTE: Always keep the Scraper as level as possible. Scraper can damage the print mat if not used correctly
To Next Page
Loading...
