Compliance
Block Up Converter Systems 6700/6900 series User Guide 121
European R&TTE Directive
CE-certified versions of the Block Up Converter 6700/6900
series and Redundancy Controller 6586 have been assessed
and comply with the following standards (articles of the
R&TTE Directive):
• Article 3.1a: EN 60950
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-12
• Article 3.2: ETSI EN 301 428
• Article 3.2: ETSI EN 301 443
Compliance with these standards is sufficient to fulfil the
requirements of the R&TTE Directive 1999/5/EC, which
encompasses the following directives:
• European EMC Directive, 89/336/EEC
• European Low Voltage Directive, 73/23/EEC with no
lower voltage limit
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of conformity
The CE declarations of conformity for each specific product
can be made available upon request to Codan or a Codan-
authorised supplier.
0682
0682
To Next Page
Loading...
