Codan NGT VR - Switching on and off the transceiver

Getting started
10 NGT Transceiver Getting Started Guide
Switching on the transceiver
To switch on the transceiver:
1 Press .
If you are prompted to enter a password, enter your user
or administrator password, then press .
If you enter an incorrect password it is automatically
erased. If you enter an incorrect password three times,
the transceiver automatically switches off.
When the transceiver is switched on, it runs a self-test
that checks the memory, hardware, LCD and keys.
Switching off the transceiver
To switch off the transceiver:
1 Hold .
The transceiver is switched off.