Code Blue IA4100 - Programming Commands

page 25 of 45 GU-139-Z1
If messages are required see section 3.
Call the extension or phone number of CB Unit, after the RFA tone:
Programming a Phone Number to Dial
Programming for Hot Line (Ring-Down)
16.3 Programming Commands
Command Explanation Format
01
02
03
04
05
06
07
08
09
12583#
99*99#
57#
5000#
*#
Phone #1 RED button
Phone #2 RED button
Phone #3 RED button
Phone #1 BLACK button
Phone #2 BLACK button
Phone #3 BLACK button
Loss of power phone number
Loss of battery phone number
PAS Fault phone number
programming mode
defaults phone / full reset
trains the phone on the local loop
programs the phone for ringdown
hang up and exit programming
01<phone number>#
02<phone number>#
03<phone number>#
04<phone number>#
05<phone number>#
06<phone number>#
07<phone number>#
08<phone number>#
09<phone number>#
The maximum number of digits including * and # is 45.
A one-second pause when entering phone numbers is the * (star) symbol.
NOTES: HOT LINE (aka ring-down) – If the IA4100 is connected to a private line,
automatic ring-down or “hotline,” all phone number locations 01 through 09 must be
cleared, with 99*99# so no phone number will be dialed.
(Continued on next page)
IA4100
Administrator Guide
Code Blue
• 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com