both used during this process. The total process will take approximately
5 minutes to complete.
• Press the “FLUSH BREWERS” button on the internal keypad.
• The machine will continually beep, and the internal display will show: (if
there is a Tea brewer present this will flush at the same time)
• The brewer will move to various positions and will dispense water into
the grout bucket.
• Once this initial flush has completed the machines beep will change and
the internal display will show:
• Insert the tablet into the brewer and press Enter, pressing ESC or any
other key will terminate the cleaning process.
To Next Page
Loading...
Need help?
General