PR120H
User’s manual
Version: 1
Page: 1 of 14
Date: 2023.01.19
INTRODUCTION
This manual should be kept with the owner and be readily accessible for operation and maintenance. This manual contains
information for the safety, operation, and maintenance.
The graphics used in this manual may show machine details that may be different than the actual machine. Components
of the machine may have been removed for illustrative purposes or the continuing improvement of the machine’s design
may cause changes that are not included in this publication.
The owner of this machine is responsible for verifying the operator of this machine is properly trained and understands the
contents of this manual
About the PR120H
The Cold Jet PR120H presents a state-of-the-art dry ice pelletizer packed with features for easy operation, swift
production shifts and high capacity.
The Cold Jet PR120H has a quick start-up that reduces downtime and loss of valuable CO2. This is secured by a start-up
sequence purging the liquid line and using a special valve to fill the chamber.
The Cold Jet PR120H uses a heat exchanger for sub-cooling the liquid CO2, enabling a higher utilization of the liquid CO2
and a better liquid to solid CO₂ ratio.
The machine parts are protected by a moisture-free enclosure, which also reduces the noise level to a minimum - below
75 dB(a). The Cold Jet PR120H provides a non-stop supply of high-density dry ice pellets. The source of raw material to
produce pellets is liquid carbon dioxide conserved at low temperatures in a storage tank.
The control system of the Cold Jet PR120H, based on Beckhoff Industrial PC and HMI system, offers maximum
functionality and a user-friendly interface. Production is started by pressing one button. Just-In-Time production
minimizes labour and waste during production.
To Next Page
Loading...
