A. Pumps (One pump or two pumps, depending
on model): Low speed for efficient water circu-
lation during filtration and heating; high speed for
maximum action of the jets. The pump functions
are activated by topside controls.
B.
W
arning and Installation Label:
Contains
important safety information and installation
instructions.
C.
Slice
V
alve:
Used to shut of
f water flow from the
spa to the equipment while servicing. Quantity
will vary depending on model. All should be open
during normal operations.
D. Electrical Connections: Contains outlets for
electrical plug connections. Connections are
made during manufacture of the spa.
E. Heater Assembly: Thermostatically controlled
and equipped with an overheat safety shut-off.
Spa Components
Reference only. Equipment is not always as shown.
Note: No consumer serviceable parts. We recommend that only an authorized
service technician perform hot tub repair or service.
A
B
C
DE
C
5
To Next Page
Loading...
Need help?
General
