Pole Assembly
–Assemble and connect one pole at a
time to the hub.
–Do not assemble poles completely.
–Go to the end of pole with the
spring clip and assemble all but the last
shock corded section. The pole should
curve down plus one section. (illus. 2)
–Insert the end with the spring clip into
one of the hub ports until it clicks into
position. (illus. 1, 2)
–Repeat for each of the five remaining
poles. (illus. 2)
14’x12’ Screen Lodge
1
When You Are Ready To Set Up Your
Shelter
–Select a level campsite clear of rocks,
branches and other hard or sharp objects.
–Do not set up your shelter under trees.
–For easier set up, two or more people
are recommended.
POLE ASSEMBLY PARTS
Instructions apply to Part Number 9192-142
Poles Part No. 9191-101
Hub Part No. 9191-102
Illus. 2
Partially assembled
frame locked into hub
Illus. 1
Poles inserted
into hub
Hub
Hub
To Next Page
Need help?
General