Need help?Do you have a question about the Collamat 2600 and is the answer not in the manual?
Step-by-step guide on threading the label web, opening the roller, and adjusting lateral guides.
Procedure to adjust paper brake power using an M3-screw for higher or lower brake force.
Method to adjust the rewinder spindle coupler power by turning an M8-screw.
Instructions for adjusting the tilt of the flap adapter relative to the module-bar.
How to adjust the pressure roller's pressing force on the adapter using a hexagon screw.
Details the optical label scanner, its components, and positioning for label detection.
Using the predispensing potentiometer to set a maximum label predispense length.
Setting the dispensing speed using the SPEED potentiometer in meters per minute.
General| Supported Materials | Paper, PE, PP, PET |
|---|---|
| Print Technology | Thermal transfer |
| Print Resolution | 300 dpi |
| Connectivity | RS232, Ethernet |
| Display | LCD |
To Next Page
