DIL-switches
The dispenser board contains two DIL-switches. These switches are used to select dif-
ferent operating modes. The following table and figure 2 show the functions and the
positions of the DIL-switches:
Switch Function Off On
DIR Turning direction of the motor Right Left
TEST Labelingmode/ Testmode Labelingmode Testmode
Figure 2: DIL-switches
DIL-switch DIR
This DIL-switch selects the turning direction (right or left) of the traction motor.
DIL-switch TEST
This DIL-switch selects the testmode. For further informations to the testmode, please
read the chapter Testmode.
TEST
DIR
Off On
5999.527-01A 25.11.98 WM Seite 6 / 32
To Next Page
Loading...
