HANGZHOU LIFESMART TECHNOLOGY CO.,LTD. www.cololight.com
APPENDIX
PC SWITCH WOL (WAKE ON LAN) START TUTORIAL
COLO PLAY PC switch relies on WoL (Wake on Lan) technology to achieve one-
key startup of PC
① PC motherboard is required to support WoL function.
② The PC must be plugged in with a network cable.
③ To use the WOL function, the 220V power supply cannot be
disconnected from the computer.
④ COLO PLAY is connected to the same Wi-Fi as the PC, and there is no
firewall or any settings block the network connection between them.
⑤ Recommended to use Win10 and above operating system page.
Enter the physical address (MAC address) of the network card of the PC in the
COLO PLAY one-button power-on function, and then it can be powered on through
the PC switch function.
If your COLO PLAY is plugged to PC's USB, you will need to set your PC to
give USB power after power off, so that COLO PLAY is stilled powered on even your
PC is off.
Video guide:
https://drive.google.com/file/d/1V0Ge0b1moT6EgLdm950VyBsRXFuDNWfM/view?us
p=drive_link
Check PC MAC address：
https://www.tomshardware.com/how-to/find-mac-address-windows-11
You can also use COLO PLAY Desktop to issue your PC's Mac address to COLO PLAY.
To Next Page
Loading...