3.5 PRE-OPERATION CHECKLIST
Should any item malfunction or need adjustment. Do not operate vehicle until the problem has
been corrected.
ITEM PROCEDURE
Fully charged or adequately charged to provide power for duration of operations.
The AC cord is disconnected from the vehicle.
Electrolyte level in each cell covers the top of cell plates.
(See Section 4.12 if vehicle is equipped with a Single Point Battery Watering System.)
Batteries secure and free of corrosion. All terminals and connections are tight.
Batteries
Battery tray and door are secure.
Tire Pressure Inflated to the specifications labeled on the tire sidewall.
Turn lights on and make sure they illuminate.
Press horn button to sound horn.
Lights, Horn and Reverse
Buzzer
Reverse buzzer sounds. (Operator seat must be occupied.)
Brake pedal has firm pedal pressure with minimal travel.
Brakes
Parking brake has proper engagement and release.
Steering Responsiveness and the absence of excessive free play.
Cargo Load is secure, balanced and not top heavy.
Obstacles Path of intended travel is free from obstructions.
Labels All warning and operation labels in place.
Accelerator Check for smooth operation.
3-5
BC 2012
To Next Page
Loading...
