Columbus Instruments Exer 3/6 Hardware Manual

35
Treadmill Hardware Manual 1011-0002 v1.02
 1 x CI-Bus Hub or CI-Bus Switch Mini
 1 x USB-A to USB-B cable, 1.8m (6ft)
 1 x RJ-45 communication cable, 1.8m (6ft)
 Treadmill Controller with power cord
 1 x Motor Cable, 2m (6ft)
 1 x Shocker Cable, 1.8m (6ft), 15 pin
 1 x Instruction Manual
 1 x Treadmill Software Flash Drive (if using with Oxymax)
 2 x Allen wrench
 4 x 3in standoffs (may have more for additional lanes)
 6 x ¼in-20 x 5/8in socket nuts (may have more for additional lanes)
 2 x Lane Base plates (may have more for additional lanes)
 1 x Support Bar (may have more for additional lanes)
 Modular Treadmill Lane
 Coupler with guard
 Motor Base Assembly
 Bottle Brush
 Fan Power Cable, 3.5mm male to male
7.2 Assembly
It is recommended to use an AC power strip to provide a common access to AC power for all components of
the Treadmill system and host computer.

Columbus Instruments Exer 3/6 Specifications

General

Brand	Columbus Instruments
Model	Exer 3/6
Category	Treadmill
Language	English