46
DAILY MAINTENANCE
CLEANING OF THE RECOVERY TANK
1.
Empty the tank through the flexible hose, unscrewing of some turns the knob and
then taking off the plug
2. Open the side plug by unscrewing the knob and rotating the closing blade
3.
Rinse the tank and clean the exhaust plug
4.
Check the perfect position of the side plug gasket
5.
Retighten the side plug and the plug onto the exhaust pipe
CLEANING OF THE RECOVERY TANK FILTER
1.
Open the recovery tank cover
2.
Clean the tank with a water jet
3.
Extract the filter of the float switch fixed inside the tank
4.
Wash it thoroughly and put it again into its position
CLEANING OF THE SQUEEGEE
Clean the squeegee with a water jet. Check the rubber wear and if necessary, turn them
upside-down or change them. The careful cleaning of the complete suction group
assures higher life of the suction motor.
To Next Page
Loading...
