COMAC OMNIA 32 - Daily Maintenance; Cleaning of the Recovery Tank; Cleaning of the Recovery Tank Filter

43
DAILY MAINTENANCE
CLEANING OF THE RECOVERY TANK
1.
Empty the recovery tank completely
2.
Empty the solution tank completely and lift it up to its vertical position blocking it
through the suitable prop
3.
Unscrew the wing nuts of the recovery tank cover, rotate it of 90° and take it off
4. Take off the rear plug of the recovery tank (1)
5.
Take off the exhaust hose from its seat and unscrew the plug (2)
6.
Clean the inside of the recovery tank with a water jet
7.
Reassemble everything repeating inversely above-mentioned operations
CLEANING OF THE RECOVERY TANK FILTER
1.
Empty the solution tank completely and lift it up to its vertical position blocking it
through the suitable prop
2.
Unscrew the filter cover rotating it counterclockwise
ATTENTION! Do not let in water into the hose connected to the filter
cover
3. Extract the filter body from its housing and rinse it thoroughly
4.
Reassemble everything repeating inversely above-mentioned operations