ADJUSTMENTS
AND
INSPECTIONS
SIMPLA 45-50
Doc. 10001244
Em. 04/2007
Rev. 00
Pag. 3 di 6
Inspection waterworks
4. Check the cleanness and the positioning of the solution tank
filter.
5. Fill the solution tank completely with water.
6. Check the tightness of the hoses, solenoid valve and
regulation of the cock.
7. Make sure, that with opened cock the solution arrives
continuously on the floor.
Inspection of suction
1. Check the function of the filter – float.
2. Check, if the cover on the recovery tank is airtight.
3. Check if the suction hoses and the squeegee hose are
airtight.
4. Check the tightness of the squeegee opening.
5. Verify the tightness of the exhaust pipe and tap.
Adjustment brushes – Forward movement
To Next Page
Loading...
