25
AT THE END OF THE WORK
3.STORING OF THE MACHINE
Proceed as follows to store the machine at the end of work:
1. Place the machine in a place where it can not cause damage or injury
2. Position the machine where the accidental fall of objects do not cause damage
3. Engage the parking brake
4. Lift the base with the specific pedal or operating the dedicated key (AU version)
5. Raise the squeegee by turning the rear lever or by operating the dedicated key (AU version)
6. Turn the key switch to "0", and remove the key from the main switch
7. Disconnect the machine connector
ATTENTION: do not leave the machine unattended without first removing the
start-up switch key and applying the parking brake. In addition, do not park the
machine in open places or on sloping floors
To Next Page
Loading...
