23
DAILY MAINTENANCE
SOLUTION TANK AND FILTER CLEANING
When the solution tank is empty:
1. Unscrew the filter and rinse the inside thoroughly
2. Take off the cartridge and clean it
3. Open the cock
4. Rinse the tank with a water jet
5. Reassemble everything again repeating inversely above operations
1. Unscrew the upper lid
2. Rinse out the tank using a jet of water
3. Remove the lid of the exaust pipe and await until the tank is totally empty
4. Reinstall everything by performing all the operations in reverse way.
Note : The filter can be cleaned also if the water tank is full. To close the tap is
needed.
To Next Page
Loading...
