ComAp IG-NTC-BB - Page 217

IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
217
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Off load occurs. See the chapter Alarm management
for more information about protection types.
NOTE:
As the Off load protection does not appear in the alarmlist, the SMS or e-mail may
contain empty alarmlist.
Setpoint: BrkOpen&CoolDn
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
BrkOpen&CoolDn-type alarm occurs. See the chapter Alarm management for
more information about protection types.
Setpoint: Mains protect
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Mains protect occurs. See the chapter Alarm
management for more information about protection types.
NOTE:
As the Mains protect protection does not appear in the alarmlist, the SMS or e-
mail may contain empty alarmlist.
Setpoint: Slow stop
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES