IGS-NT Combi, SW Version 3.0, ©ComAp – May 2013
IGS-NT-Combi-3.0 Reference Guide.PDF
This setpoint is used to adjust the maximum number of consequent attempts to
perform an active data call. The next attempt is performed 120s after the previous
unsuccessful attempt.
Setpoint: Acall+SMS lang
The setpoint specifies in which language the active SMS and e-mail messages
are issued. Adjust the setpoint to the index of the required language. The index
can be obtained from the tab Languages in GenConfig. Index 1 is always english.
Group: Date/Time
Setpoint: Time stamp act
DISABLED, ENGINE RUNNING, ALWAYS [-]
The setpoint selects the Time stamp function mode.
The function is disabled.
While the engine is running the Time stamps records are
recorded into the history log with period adjusted by setpoint
Time Stamp Per.
The Time stamps records are recorded into the history log
with period adjusted by setpoint Time Stamp Per all the time
while the controler is switched on.
Setpoint: Time Stamp Per
The setpoint adjusts the time interval for Time stamp records. See also the
setpoint Time stamp act.
Setpoint: #SummerTimeMod
DISABLED, WINTER, SUMMER, WINTER-S, SUMMER-S [-]
To Next Page
Loading...
