ComAp InteliNano MRS 3 - Page 3

InteliNano
NT
MRS 3 Operator Guide, ©ComAp – July 2017
3
GEN-SET OPERATION INDICATORS
Position
Description
6
Engine operation. Green LED is blinking, if engine is starting, cooling or stopping. When
LED is on the engine is running and is loaded or ready to load.
7
Operating mode. When the green LED is on, the controller is in Auto operating mode.
When is off the controller is in Manual mode.
8
Alarm red LED. The LED will blink when there is one or more active warning or active
shutdown alarm. The LED is on when the active shutdown alarm is confirmed and the
engine can’t be started.
9
Graphic B/W display, 128x64 pixels