InteliNano
NT
MRS 3 Operator Guide, ©ComAp – July 2017
8
Figure 3.2
3.1 Events
Every event listed in table below is saved in history with running hours stamp see Figure 3.3.
Figure 3.3
event – Power On
3.2 Warnings
3.2.1 Active warning
When a warning occurs, O04 Alarm and O15 Common Warning outputs will close and the red LED
above STOP button will blink. Warning symbol will blink in the upper-right corner of the LCD and the
proper warning symbol will be displayed in the history with running hours stamp. Active warning can’t
be confirmed.
Figure 3.4
active warning – Low Battery
To Next Page
Loading...
