ComAp InteliNano MRS 3 - Display Screens Structure; Main screens structure (CT not connected)

InteliNano
NT
MRS 3 Operator Guide, ©ComAp – July 2017
4
2 Display Screens Structure
The displayed information is structured into "screens". Use ▲ and ▼ button to switch over the
screens.
2.1 Main screens structure (CT not connected)
Figure 2.1
• First screen displays basic information about voltage and frequency measurement. There is
also displayed position (status) of GCB, running hours counter and RPM information. When
any alarm occurs the general alarm symbol will be displayed on the LCD’s upper right corner.
• Second screen contains detailed voltage and frequency information.
• Third screen shows the senders information – oil pressure; coolant temperature; fuel level and
battery voltage.
• Fourth screen shows latest alarms or events.