InteliNano
NT
MRS 3 Operator Guide, ©ComAp – July 2017
6
• First screen displays basic information about voltage, frequency and real power measurement.
Icon depicting installed CT is displayed next to generator symbol. There is also displayed
position (status) of GCB, running hours counter and RPM information. When any alarm occurs
the general alarm symbol will be displayed on the LCD’s upper right corner.
• Second screen contains detailed voltage and frequency information.
• Third screen shows measured current for individual phases. For each current bar-graph is
shown.
• Fourth screen shows real and apparent power with power factor for individual phases and
totals are also displayed.
• Fifth screen shows senders information – oil pressure; coolant temperature; fuel level and
battery voltage.
• Sixth screen shows energy counters (real and reactive) and also running hours counter.
• Last screen shows latest alarms or events.
To Next Page
Loading...
