ComAp IS-NT-BB

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
144
Force value
possible
YES
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as History record occurs. See the chapter Alarm
management for more information about protection types.
NOTE:
As the History record protection does not appear in the alarmlist, the SMS or e-
mail may contain empty alarmlist.
Setpoint: Alarm only
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Alarm only occurs. See the chapter Alarm management
for more information about protection types.
Setpoint: Warning
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a warning-
type protection occurs. See the chapter Alarm management for more information
about protection types.
Setpoint: Off load
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
YES