ComAp MainsPro G99TT - Table of Contents

MainsPro G99TT 1.0.0 Global Guide
2
Table of contents
1 Document information 6
1.1 Clarification of Notation 6
1.2 About this guide 6
1.2.1 Installation and Operation Guide 6
1.2.2 Application Guide 6
1.2.3 Reference Guide 6
1.3 Legal notice 6
1.4 Document history 7
2 Introduction of Installation and Operation Guide 8
2.1 Purpose of this manual 8
2.2 Conformity declaration 8
2.3 Warnings 8
2.3.1 Dangerous voltage 8
2.3.2 Adjust the setpoints 9
3 Installation data 10
3.1 Dimensions 10
3.2 List of terminals 11
3.3 Wiring 11
3.3.1 "Star" connection 12
3.3.2 "Delta" connection 13
3.3.3 Connection with voltage transformers 13
3.3.4 Single-phase connection 14
3.3.5 Power supply 14
3.3.6 Relay outputs connection 15
3.3.7 Binary switches connection 16
3.4 Measurement range 16
3.5 Wiring examples 16
4 User interface 19
4.1 Front panel elements 19
4.1.1 Pushbuttons 20
4.1.2 Setpoints change 20
4.1.3 Reset operation time 21
4.1.4 Reset trip counters 21
4.1.5 TEST mode activation 21
4.1.6 Factory default 22