MainsPro G99TT 1.0.0 Global Guide
21
4.1.3 Reset operation time
1. Enter the init screen by pushing the ENTER and ESC at the same time.
2. Press ← to enter the Reset Oper.Time? screen:
3. Using ← and → choose the required operation. By selecting YES, "Operation Time" timer will be reset,
and the last five events will be deleted. Press ENTER to confirm your selection.
4. By selecting NO and pressing ESC or by pressing ESC, return to the measurement screens with no
change.
4.1.4 Reset trip counters
1. Enter the init screen by pushing the ENTER and ESC at the same time.
2. Press ← and then use the buttons ↑ and ↓ to enter the Clear Statistics dialog screen:
3. Using ← and → choose the required operation. By selecting YES, all trip counters will be reset. Press
ENTER to confirm your selection.
4. By selecting NO and pressing ENTER or by pressing ESC, return to the measurement screens with no
change.
4.1.5 TEST mode activation
1. Enter the init screen by pushing the ENTER and ESC at the same time.
2. Press ← and then use the buttons ↑ and ↓ to enter the Test mode activation screen:
3. Using ← and → choose the required operation. By selecting YES, you will activate the TEST mode - see
the chapter TEST mode (page 42) in Application Guide. Press ENTER to confirm your selection.
4. By selecting NO and pressing ENTER or by pressing ESC, return to the measurement screens with no
change.
To Next Page
Loading...
