MainsPro G99TT 1.0.0 Global Guide
9
dangerous voltage.
2.3.2 Adjust the setpoints
All parameters are adjusted to their typical values. However the setpoints have to be checked and adjusted to
their required values before the first starting of the gen-set.
The following instructions are for qualified personnel only. To avoid personal injury do not perform any action
not specified in related guides for product.
Note: ComAp believes that all information provided herein is correct and reliable and reserves the right to
update at any time. ComAp does not assume any responsibility for its use unless otherwise expressly
undertaken.
6 back to Introduction of Installation and Operation Guide
To Next Page
Loading...
