Mains pro 1.6.1 Global Guide
21
4.1.3 Reset operation time
1. Enter the init screen, by pushing the ENTER and ESC at the same time.
2. Press ← to enter the Reset Oper.Time? screen:
3. Using ← and → do your selection. By selecting YES, “Operation Time" timer will be reset, and the last five
events will be deleted. Press ENTER to confirm your selection.
4. By selecting NO and pressing ESC or by pressing ESC, return to the measurement screens with no change.
4.1.4 Reset trip counters
1. Enter the init screen, by pushing the ENTER and ESC at the same time.
2. Press ← to enter the Clear Statistics dialog screen:
3. Using ← and → do your selection. By selecting YES, all trip counters will be reset. Press ENTER to confirm
your selection.
4. By selecting NO and pressing ENTER or by pressing ESC, return to the measurement screens with no
change.
4.1.5 TEST mode activation
1. Enter the init screen, by pushing the ENTER and ESC at the same time.
2. Press ← and → to enter the Test mode activation screen:
3. Using ← and → do your selection. By selecting YES, you will activate the TEST mode - see the chapter
TEST mode (page 42) in Application Guide. Press ENTER to confirm your selection.
4. By selecting NO and pressing ENTER or by pressing ESC, return to the measurement screens with no
change.
To Next Page
Loading...
