Mains pro 1.6.1 Global Guide
54
Ext
Enables or disables the functionality of the External trip binary switch.
ENABLED the binary switch is enabled
DISABLED the binary switch is disabled
Default setting ENABLED
6 back to Library of Setpoints
F.R.
Enables or disables the functionality of the Fault reset binary switch and the button Fault reset.
ENABLED the binary switch and the button is enabled for fault reset
DISABLED the binary switch the button is disabled for fault reset
Default setting DISABLED
6 back to Library of Setpoints
Alt
Enables or disables the functionality of the Alternative settings binary switch.
ENABLED the binary switch is enabled
DISABLED the binary switch is disabled
Default setting ENABLED
6 back to Library of Setpoints
Disable
Enables or disables the functionality of the Disable binary switch.
ENABLED the binary switch is enabled
ENABLEDexlTRP
the binary switch is enabled only in case that the unit is not in TRIP state. If the fault
was not reset after its detection, activation of the BI Disable will have no influence on
the unit operation until fault reset is performed
DISABLED the binary switch is disabled
Default setting DISABLED
6 back to Library of Setpoints
To Next Page
Loading...
