ComAp MainsPro - CommSigImp;!CommSigImp; CommSigDel;!CommSigDel; Voltage Signalling Outputs (U Sig;!U Sig); Frequency Signalling Outputs (f Sig;!f Sig)

Mains pro 1.6.1 Global Guide
45
11 Technical data
11.1 Accuracies and reaction times 45
11.2 Technical parameters 46
11.3 Factory default setting of MainsPro unit 47
6 back to Table of contents
11.1 Accuracies and reaction times
11.1.1 Operating area
MainsPro provides the below mentioned accuracies and reaction times in case that the measured voltage on all
3 phases is within the green area on the picture below. Outside of the green area, MainsPro provides the
expected performance (i.e. trips in case of voltage overreaching the green area border), but the behaviour,
accuracies and reaction times may not be guaranteed.