Comdial DX-80 - Automatic Line Selection and Busy Rings

DX-80 Cordless User
May ‘05 Comdial 39
The extension returns to an idle state.
2.2.3 USING AUTOMATIC LINE SELECTION
This feature allows you to access a specific outside line or intercom
automatically when you lift the handset or press the speakerphone
button.
To set up automatic line selection, perform the following steps.
1. Press Func + 9 + 5. The current selection displays (ICM =
Intercom).
2. Press the icm soft key to select Intercom.
3. Press co to select a specific outside line.
4. Enter the outside line directory number (740–755 = 1–16).
5. Press save.
6. Press co gp to select a specific outside line group.
7. Enter the valid outside line group directory number (9 for out-
side line group 1, 800 for outside line group 2… 806 for out-
side line group 8).
8. Press save.
2.2.4 SETTING YOUR BUSY RING OPTIONS
Your phone rings at the lowest volume setting if a call comes in while
you are on the line. You can eliminate this low (busy) ring entirely if
you prefer.
(( ))
AUTO HOLD DENY