Comestero Group World Key - Warnings; Unpacking; Reception of Packaged Product; Handling

19
EN
3. Warnings
Read this manual carefully before use.
Knowledge of the information and instructions of this manual is
fundamental to use the product correctly.
Check upon receipt that the package and the product have not been
damaged during transport.
Take care with the electrical connections. Faults due to failure to follow the warnings
of this publication are not covered by warranty.
Significant situations that need to be followed strictly are signalled by specific symbols
in this manual.
4. Unpacking
4.1 Reception of packaged product
Check upon receipt that the product has not been damaged during transport. If any
damage is noticed, notify the transporter immediately.
After transport the package must be intact, that is, it must not:
• Show dents, signs of shocks, deformation or breakages of the container.
• Show areas that are wet or signs that would point to the fact that the casing
has been exposed to rain, frost or heat.
• Show signs of tampering.
Also, check that the content of the package matches the order.
4.2 Handling
In order to prevent damage to the machine, it is recommended to
transport it exclusively inside its original packaging.