Comestero Group World Key - Programming Key; Clone Programming Key; Firmware Update; Data Collection

45
EN
7.1.3 Programming Key
The programming key is a special contactless key with an anthracite coloured cap
and a red body. This key can program the operating parameters of many of the World
Key devices. The data on this key is formatted according to the type of operation
requested through the UNICO program. The subsequent programming of the system
takes place simply and quickly by inserting the key in the reading head (Moon, Sky or
Galaxy). The presence of the CVS signalling LEDs guides the user through the exact
programming sequence of the World Key device parameters.
The key is delivered without the application or the safety codes; for use, please
The key is delivered without the application or the safety codes; for use, please The key is delivered without the application or the safety codes; for use, please
The key is delivered without the application or the safety codes; for use, please
refer to the UNICO software guide.
refer to the UNICO software guide.refer to the UNICO software guide.
refer to the UNICO software guide.
7.1.4 Clone Programming Key
The Clone programming key is a special contactless key the same colour and with the
same storage capacity as the programming key, able to clone the configuration
present on a device transferring that configuration onto other devices without using
PC software.
The key is delivered without the application or t
The key is delivered without the application or tThe key is delivered without the application or t
The key is delivered without the application or the safety codes; for use, please
he safety codes; for use, please he safety codes; for use, please
he safety codes; for use, please
refer to the UNICO software guide.
refer to the UNICO software guide.refer to the UNICO software guide.
refer to the UNICO software guide.
7.1.5 Firmware update
It is possible to update the operating firmware of the World Key readers and the
reading heads using the PC with the connection cable via USB. Two distinct
firmwares exist for updating the World Key systems, one for updating the CPU and
one for updating the reading heads .
7.2 Data collection
In the World Key system, the data can be collected through three devices:
•
• •
• Audit Key;
•
• •
• Via Rs232 or USB with PC and UNICO & UNICO AUDIT program;
•
• •
• IrDA interface.
7.2.1 Audit Key
The Audit Key is a special key with an anthracite coloured cap and a yellow body, with
a high storage capacity, able to make up to 65/70 collections, depending on the
quantity of data to be exported. Subsequently via a PC, the desktop terminal and the
UNICO or UNICO AUDIT software, it is possible to download the data stored on the
key, view it, print it or save it in a .TXT or .XML file for subsequent processing using
special management software. Appropriate formatting of the Audit -> Audit + Log key
also enables the logs recorded inside the reader to be stored during the data
collection stage. In this particular function, the following can be exported for each key:
Machine no. - Key no. date/time - type of operation performed on the key;