9
EN
Risks deriving from using the machine
If maintained in good operating conditions and installed correctly (according to the
instructions of this manual), the machine does not pose any danger for the operator.
Electrical hazards:
Electrical hazards:Electrical hazards:
Electrical hazards:
direct contacts during connection to the main
power supply.
Operations carried out by a qualified technician
qualified technicianqualified technician
qualified technician.
Hazards during machine installation and setup
Follow the machine installation instructions below so that risks for people and property
are minimal.
Electrical hazards
Electrical hazardsElectrical hazards
Electrical hazards:
direct contacts during connection to the main power
supply. Operations carried out by a qualified technici
qualified techniciqualified technici
qualified technician
anan
an.
Caution:
• Make sure that the distribution line is sized according to the power supply used
by the machine.
• Connect the system to ground before connecting the machine and the
accessories.
• Connect the device to SELV type circuits.
Hazards during machine maintenance
Electrical hazards:
Electrical hazards:Electrical hazards:
Electrical hazards:
direct contact with live parts within the electrical
cabinet.
Operations carried out by a qualified technician
qualified technicianqualified technician
qualified technician.
Caution:
• Service the machine only after the main power supply has been switched off.
To Next Page
Loading...
