Comm-Tec UP-51TS - Page 28

Compact Scaler Switcher
Comm-Tec S.r.l. 28 www.comm-tec.it
Command
Function
Feedback Example
50903%
Menu
CEC cmd: menu
50904%
Retreat
CEC cmd: rev
50905%
Forward
CEC cmd: fwd
50906%
Up
CEC cmd: up
50907%
Down
CEC cmd: down
50908%
Left
CEC cmd: left
50909%
Right
CEC cmd: right
50910%
Confirm command
CEC cmd: select
50911%
Exit command
CEC cmd: exit
50913%
Source power on
Source power on
50914%
Source power off
Source power off
50920%
TV power on
Display power on
50921%
TV power off
Display power off
Note:
▪ Screen output adjusting avails only when the screen output adjusting is on. Send
command 50678% to turn on.
▪ Under HDCP ON or HDCP OFF mode, the video signal can be switched to HDMI
and HDBaseT output seamlessly, while sending 50791% to set as HDCP Active
mode, the video signal can’t support seamless switching.