Commax DRC-481L - Setting and Managing PINs; Management PIN Setup

- 11-
5. Setting PIN
5-1. Management PIN Setup
✽ P - Old Management PIN - E - 0 - E - New PIN -E
✽ Management PIN must be 4-digits long.
✽ 0000 will not be recognized as a valid PIN.
① Press the Program button (P). (‘Prog’will appear)
② Enter the old PIN 4321.
③ Press the Call button (E).
④ Press the Program Number 0.
⑤ Press the Call button (E). (‘PASS’will blink)
⑥ Enter the new PIN.
⑦ Press the Call button (E).
⑧ Management PIN has been updated.
Press the Program button (P).
Enter the old PIN 4321.
Press the
Call button (E).
Press the Program Number 0.
Press the
Call button (E).
Press the Call button (E).
Management PIN has been updated.
Enter the new PIN. ex)1470