Commax DRC-481L - Setting Serial Numbers

- 16-
7-2. Configuring Serial Number from the Main Entrance Interphone
✽ P - Building (Management) PIN - E - 3 - E - Serial Number - E
① Press the Program button (P). (‘Prog’will appear)
② Enter the Building (Management) PIN.
③ Press the Call button (E).
④ Press the Program Number (3) .
⑤ Press the Call button (E). (The Serial Number previously entered will be indicated)
⑥ Enter the new Serial Number.
⑦ Press the Call button
Serial Number has been updated.
Press the Program button (P).
Enter the Building (Management) PIN.
Press the
Call button (E).
Press the
Program Number (3).
Press the
Call button (E).
The Serial Number previously
entered will be indicated
Press the Call button (E).
Serial Number has been
updated.
Enter the New Serial Number ex) No. 2