Commend GEC 880 - The Station; The Operator Station; BOOT Sequence

GEC 880 The station
Version 1.1/1107 Page 19 of 24
The station
The operator station
BOOT Sequence
After connecting the power supply PA20W15V to the Counter Intercom
Station a short boot sequence is carried out:
n Plug-in -> “BOOT” is shown in the display and the LED shines white for one
second.
n For one second the station type is displayed (e.g.“GEC881”) and a start
beep is audible.
n After that “STDBY” is shown in the display (LED turns blue) and the
Counter Intercom Station is ready for use.
GEC 882GEC 881
A
B
C
A
B
C
Internal loudspeaker
Gooseneck
microphone
Internal
microphone
LED
Indication of station status
or parameters
LC-Display
Index field
Keypad