Need help?Do you have a question about the Commend C-G8-S0 and is the answer not in the manual?
Connects up to 100 Intercom Server housings over ISDN with dial-up connection.
Enables Auto Dialler Mode and PABX Mode functions for ISDN connections.
Outlines remote configuration methods and S0 configuration possibilities (MSN/PABX).
Describes connection options and their optimal/correct/impossible configurations.
Explains configuring code numbers for Intercom Server housings to manage unique calling number assignments.
Details the installation process for G8-S0/G3-S0-I, including board usage and slot limitations.
Guides on using CCT 800 software for defining telephone numbers, dial prefixes, and connection types.
Provides practical examples of parallel point-to-point connections between Intercom Servers.
Explains defining Intercom Server blocks and lists reserved function codes used for dialling operations.
Details setting block numbers for Intercom Server housings and defining inter-server connections within blocks.
Describes specific settings for functions like All Call, Group Call, Ringing at a group, and Alarm initiation.
Explains transferring calls to predefined telephone numbers with configurable dialling sequences and timing.
Covers outgoing calls via dialling interface or direct outward dialling, including wildcard number ranges.
Details features like initiating dialling at incoming calls, DTMF after-dial mode, and blocking incoming calls.
Provides information on where to find more product and service details online via a website.
General| Category | Intercom System |
|---|---|
| LED indicator | Yes |
| Weight | 0.8 kg |
| Housing material | Aluminum |
| Microphone | Yes |
| Speaker | Yes |
To Next Page