Commend C-G8-S0 - Network Functions; Define the block numbers

G8-S0/G3-S0-I Network Functions
1.1/1010 17
Network Functions
Intercom Server blocks can be defined for functions like All Call, Group Call, etc. in Intercom Server net-
works (G8-NET, LAN, WAN, CNET-E1, CNET-W, S0). The Intercom Server blocks define, in which hous-
ings these functions are initiated. By pre-dialling a code number one Intercom Server or a group of In-
tercom Servers
are selected and then the function is carried out.
If no code number is pre-dialled the functions are carried out in all Intercom Server hous-
ings connected over G8-NET, CNET-E1 or CNET-W, but not in Intercom Server housings con-
nected over LAN/WAN or S0.
Example with CNET-LAN:
These Intercom Server blocks can be used for the following functions:
 All Call, Group Call
 Ringing at a group
 Alarm
 Music, Radio conference 6T, Predefined conference 7T
 Subscriber index, Chime signal, Video

Central Control Desk functions, ICX-Output (e.g. ComWIN) – required only for LAN/WAN or S0-net-
works
Define the block numbers
The block numbers may not collide with the calling numbers, input- or output numbers!
If you want to use 1-digit block numbers for the Intercom Server blocks, please mind, that most of the
digits are reserved for functions:
That means, all digits except 1, 2 and 3 are reserved for the internal functions (the function codes could
be changed). Usually the calling numbers start with 1, 2 and 3, so we recommend to use 2-digit block
numbers (see ”
Configuration example” on page 19).
Note: Hexadecimal block numbers are possible, however no numbers containing “F” may be used (0F,
1F...9F,AF,BF,CF,DF,EF,as well as F0..FF)
00 Initiate all call 8T Take over door call
01 Initiate group call 94 Call transfer (additional)
02 Follow Me 95 Call transfer (delete previous)
03 Privacy function 96 Camera connection static picture
0T Reconnection with last call 97 Camera connection scanning
4T Music 98 Initiate ringing at a group
5T Answer re-call request 9T1 Program direct dialling
6T Reception radio conference 9T2 Initiate alarm
7T Initiate predefined conference 9T3 Cancel alarm
Block 80 = Paris, Lyon, Aix-en-Provence
Block 81 = Paris
Block 82 = Lyon
Block 83 = Aix-en-Provence
e.g. All Call: all: 8000
Paris: 8100
Lyon: 8200
Aix-en-Provence: 8300
Paris Lyon
Aix-en-Provence
GE 800 #1 GE 800 #2
GE 800 #3
IP
Block 80, 81 Block 80, 82
Block 80, 83