Community R-Series Installation/Operation Manual for Models R.5 and R.25 — Page 15
Weather-Stop™ Grille
Each enclosure is fitted with Community’s proprietary Weather-Stop™ protective grille. The grille consists of a
corrosion-resistant outer layer of perforated steel with a proprietary zinc-rich epoxy dual-layer powder coat finish
in light grey, a center layer of UV-resistant reticulated foam, and an inner layer of fine-mesh screen made from a
UV-resistant synthetic material that blocks rain and fights rusting. This grille assembly prevents water intrusion,
while providing a high degree of acoustic transparency.
Stainless Steel Hardware
Exposed hardware and fasteners are made of corrosion-resistant stainless steel.
Input Cables
To help maintain its weather-resistant properties, there are no connectors on an R-Series loudspeaker. Instead,
input is via an attached cable rated for outdoor use.
Envirotech™ Technology
All internal circuitry is protected from the elements with our proprietary Envirotech coating which seals sensitive
electronic components against the effects of moisture and corrosion.
High-Performance Crossovers and Autoformers
R.25 and R.5 models feature high-power, high-performance two-way and three-way passive crossover networks
with over-current protection circuitry. 70V/100V models use a 200W, high-performance autoformer with lower
loss than a true transformer (the R.5SUB-T uses a high-performance true transformer).
Versatile Mounting Accessories
Weather-resistant stainless steel yoke-style mounting brackets are included with most models, while a variety of
optional mounting kits are available for others.
Custom Colors
For volume purchases, all R-Series and WET II products may be ordered in custom color enclosures at a
nominal fee to elegantly match their physical installation environment.
FEATURES
To Next Page
Loading...
