COMPA TECH S.r.l.
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
- 20 -
ENGLISH
Operator’s handbook
GENERAL INFORMATION ON THE
MANUFACTURER
Active for nearly 50 years in the fi eld of woodwor-
king machines, Compa has been specialising for
over twenty fi ve years in the production of cutting-
off machines and is the only company with such a
signifi cant specialisation and extended and qualifi ed
range of models.
Compa Tech s.r.l. cannot be held liable for any dama-
ges resulting from use not covered in this manual or
from maintenance performed incorrectly.
Compa Tech s.r.l. All rights reserved.
For any help or advice, please contact your local
dealer.
When contacting the Dealer or Compa Tech S.r.l. in
writing or by telephone, please provide the following
machine details:
Machine model
Serial number
Machine voltage and frequency
Name of the dealer from which it was purchased
Description of the identifi ed defect
Description of the type of process carried out
Daily ours of use
Send to: COMPA TECH S.r.l.
Via Piemonte, 11/15
42012 - Carpi (MO) - ITALY
Tel: (+39) 059-527887
Fax: (+39) 059-527889
E-mail: info@compasaw.com
Http: //www.compasaw.com
MACHINE IDENTIFICATION
The model of the machine is specifi ed on a plate (see
fi g.2) located at the front of the base, indicating the
following machine details:
1. Name of manufacturer
2. Machine model
3. Technical specifi cations
4. Certifi cation mark
5. Year of construction
To Next Page
Loading...
